
331259
Highly efficient ear muffs for protection of loud noises of all pitches in factories and areas where air compressors and turbines are used. The MSA left/RIGHT, with a new headband with improved comfort, individual ear cups -left and right- and more space for the outer ear, this unique and careful design gives a wider range of protection. Approved according EN 352.

331246
New generation of lightweight air-purifying full face respirator offers a comfortable fit. The face piece lens has been engineered to be optically correct, giving you superior visibility and peripheral vision. The wraparound scratch-resistant polycarbonate face piece lens provides a wide distortion-free field of vision.
Model: 3200 The lens meets all requirements of ANSI Z87.1 including the high-impact performance requirements. Requires only routine filter replacement and approved according EN136 class 2. As well approved by NIOSH (The National Institute for Occupational Safety and Health) according 42 CFR, part 84

331223
A portable breath analyzer which offers latest in cutting-edge breath alcohol sensing technology. This can be operated with a mouthpiece (included in package) for single use, or you can blow directly into the unit. If the “Flo” message was displayed while in use, this warns “insufficient airflow”, and you are not blowing enough. The sensor can be changed easily. Has a range of 0.00 to 0.40% BAC (Blood Alcohol Content) or Hi/Lo range. Requires recalibration on every 6 to 12 months by professional service.

331221
An instrument to perform a breath alcohol test with speed and precision. It is also possible to measure alcohol in the ambient air (passive), in which case a mouthpiece isn‘t required.
All measurement functions can be operated with just one button to make it easier for you to perform the test. The large back-lit display is easy to understand due to its full-text messages which guide you securely through the alcohol test. An LED and audible signal complement the display and indicate the end of a measurement process.

331219
An instrument to perform a breath alcohol test with speed and precision. It is also possible to measure alcohol in the ambient air (passive), in which case a mouthpiece isn‘t required.
All measurement functions can be operated with just one button to make it easier for you to perform the test. The large back-lit display is easy to understand due to its full-text messages which guide you securely through the alcohol test. An LED and audible signal complement the display and indicate the end of a measurement process.

331164
Economical, lightweight, comfortable headwear. Made of high-density polyethylene in a variety of molded-in colours ideal for general industry and construction. Suspension, sweat band and nape strap form the complete protective system. Cap with slots to hold accessories. When ordering, specify colour.

331157
Three types of ear plugs are available. Made of silicon-rubber for general noise from high-pitched to low-pitched noises or only for high-pitched noises. Made of flexfit, self-expandable and self-adjusting foam.

331157
Three types of ear plugs are available. Made of silicon-rubber for general noise from high-pitched to low-pitched noises or only for high-pitched noises. Made of flexfit, self-expandable and self-adjusting foam.

331143
For protection of the face against abrasive particles, flying objects, and chemical splashes. The faceshield stays in the up or down position as required with friction pivot hinges.

331122
The Advantage 200 LS Respirator provides a better looking, lighter, and softer face piece, which is made from a translucent “Ocean Blue” formulation of thermoplastic rubber: The MSA patented MultiFlex® System – a soft, pliable combination of rubber and plastic that provides a virtually customized fit. In addition, the highly effective AnthroCurve™ Sealing Surface instantly conforms to each wearer, equalizing pressure on the face seal area and eliminating annoying pressure points. The unmatched fit exceeds all previous levels of comfort. This half mask type respirator features a twin filter cartridge with large area and capacity to provide for low breathing resistance and long life. Not for use in atmospheres containing less than 19.5% oxygen.

331080
A combined smoke & heat detector tester in one tool, suitable for testing; (a) Optical and ionization smoke detectors, and (b) Heat detectors (fixed temperature or rate-of-rise). The detector can be either conventional or analogue addressable. Also, this enables testing of multi-detectors or multi-criteria detectors from a single test unit.

331077
For secure testing of optical or photoelectrical smoke detectors without the need of additional testing instruments. Safe and easy to use, gentle on electronic instruments, evaporation without residues, can content lasts for up to 150 applications, and free of silicone. Shake can before use and spray test spray for about 5 seconds and with a distance of approx. 30 cm towards the smoke detector. The functioning of the smoke detector has to be tested on a regular basis, and recommended testing period is two inspections per year.

331073
For testing ionization and photoelectric detector at sight for smoke detection fire alarm system on the ceiling. Test gas is separate order.

331073
For testing ionization and photoelectric detector at sight for smoke detection fire alarm system on the ceiling. Test gas is separate order.

331071
Designed to provide quick and reliable testing of heat detector with a maximum of safety regardless of the number of units to be tested.

331071
Designed to provide quick and reliable testing of heat detector with a maximum of safety regardless of the number of units to be tested.

331013
A calibrated test gas kit for sensor inclusively testing Carbon Monoxide (CO) alarms manufacturered to BS EN 50291(Europe) and UL 2034(USA). Low cost, safe and easy to use, this test kit ensures CO alarm sensors are still sensing CO. Sensors have a limited and underminable life and can be effected by airborne pollutants such a cigarette smoke, cooking fumes etc. Each kit contains a patented enclosure shroud which holds the test gas at the required level for a fixed time to facilitate a field sensor test. It contains sufficient test gas to carry out 11 tests per can.

330985
The ideal disposable, gas-tight chemical protective suit for hazmat incidents. Where complete protection against hazardous gases, liquids and particles is of the utmost priority, this lightweight garment is the suit of choice. The suit material is resistant to the chemical substances listed below in accordance with EN 943-1:2002 1a, EN943-2:2002(ET), SOLAS II-2 Reg.19 and NFPA 1994 : 2007. Note : Breathing apparatus and boots are excluded from the set.

330751
Versatile box to store fire hoses of up to 20 mtrs in length with nozzles and spanner. The box and cover are made of polycarbonate for weather and sea water resistance.

330618
Hands-free safety light, providing brilliant illumination of the work site, to be used in confined space and where explosive gas is a potential danger, such as on oil tankers, chemical tankers, LNG tankers, etc. The headlight can be easily attached to the helmet by means of bracket and headpiece clip. Lead acid power rechargeable battery is provided with belt loops.

330598
It features large buttons for easy use, and its polycarbonate housing protects the detector for drops of up to 10 feet. The detector also boasts the exclusive MotionAlert™, which lets others know if the user has become immobile, and InstantAlert™, a manual alarm that alerts others if a dangerous situation has arisen, e.g. in a confined space, while the large buttons and bright display makes operation possible even when the user is wearing gloves.



330537
Required to be provided on board by SOLAS regulation 1983 amendments Chapter II, Part C, Regulation 53 and 62. For measuring and testing any area where combustible gases or vapors may have accumulated.
