813302
For moderate pressure service on boilers, vats and tanks. Furnishable in round gauge glass or acrylic gauge “Plexy” glass supplied on request. Specify whether glass or acrylic is required when ordering. Standard length for both in 1,000 mm but it is furnishable in up to 2,000 mm if required.

813290
For the heat insulation and protection of glass. Mica is generally used. The mica is generally furnished in a thickness of 0.2 mm. The packing and mica are furnished separately.

813205
“Klinger” type boiler gauge glasses. Available in pressure capacity of 2.0 MPa (20 kgs/cm2) and 3.9 MPa (40 kgf/cm2).

813120
Synthetic made sponge filter ideal for immersion in any cascade tank or sump for filtering of hydraulic systems, coolant fluids, etc. Size is 1,000 x 1,000 mm and 10 mm thick. Colour is milky white.

815633
These are sheet gaskets made of VALFLON™ (PTFE) with excellent chemical resistant and non-stick properties. VALQUALON™ (PTFE-blended sheet) Gasket Valqua® No. 7020 (For oxidizing)
In order to improve the cold flow (the creep phenomenon), which is a drawback in PTFE, these gaskets are shaped by means of a special manufacturing process where inorganic filler material is compounded. Features: Excellent acid resistance, Heat resistance, Anti-cold flow properties , Can handle various chemicals. Temperature: -200 to 200oC / -328 to 392oF, Pressure: Max 4 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), solvents, corrosive liquids (especially, acid liquid), liquefied gas, cryogenic fluid, flammable gas. Applications: Pipe flanges, valve bonnets, towers & tanks. The ring molded article supports JPI (ASME / ANSI)

815632
These are sheet gaskets made of VALFLON™ (PTFE) with excellent chemical resistant and non-stick properties. VALQUALON™ (PTFE-blended sheet) Gasket Valqua® No. 7020 (For oxidizing)
In order to improve the cold flow (the creep phenomenon), which is a drawback in PTFE, these gaskets are shaped by means of a special manufacturing process where inorganic filler material is compounded. Features: Excellent acid resistance, Heat resistance, Anti-cold flow properties , Can handle various chemicals. Temperature: -200 to 200oC / -328 to 392oF, Pressure: Max 4 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), solvents, corrosive liquids (especially, acid liquid), liquefied gas, cryogenic fluid, flammable gas. Applications: Pipe flanges, valve bonnets, towers & tanks. The ring molded article supports JPI (ASME / ANSI)

815606
Compressed Non-Asbestos Fiber Sheets are rolled and vulcanized sheet-type gasket materials, in which special rubber binders and a small amount of filler material are mixed with organic and inorganic fibers. General use type: Valqua® No. 6500, Features: An economical option, Easy to handle, Temperature: -50 to 183oC / -58 to 361oF, Pressure: Max 3 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), liquefied gas, Applications: Pipe flanges, valve bonnets and other equipment used in various industries, Color type: Blue, Print color: Black, The ring molded article supports JPI (ASME / ANSI).

815605
Compressed Non-Asbestos Fiber Sheets are rolled and vulcanized sheet-type gasket materials, in which special rubber binders and a small amount of filler material are mixed with organic and inorganic fibers. General use type: Valqua® No. 6500, Features: An economical option, Easy to handle, Temperature: -50 to 183oC / -58 to 361oF, Pressure: Max 3 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), liquefied gas, Applications: Pipe flanges, valve bonnets and other equipment used in various industries, Color type: Blue, Print color: Black, The ring molded article supports JPI (ASME / ANSI).

815603
BLACKHYPER™ Valqua® No. GF300. This gasket is mainly composed of PTFE as a binder and doesn’t contain any rubber. Features: Very minor change in physical properties even under high temperatures, Excellent chemical resistance. Excellent heat resistance, Easy to handle , Does not harden easily, No hardening makes retightening possible. Temperature: -200 to 300oC/-328 to 572oF, Pressure: Max 3.5 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), solvents, liquefied gas, Applications: Pipe flanges, valve bonnets, towers & tanks, pressure vessels and heat exchangers, Color type: Black, Print color: Black. The ring molded article supports JPI (ASME / ANSI)

815602
BLACKHYPER™ Valqua® No. GF300. This gasket is mainly composed of PTFE as a binder and doesn’t contain any rubber. Features: Very minor change in physical properties even under high temperatures, Excellent chemical resistance. Excellent heat resistance, Easy to handle , Does not harden easily, No hardening makes retightening possible. Temperature: -200 to 300oC/-328 to 572oF, Pressure: Max 3.5 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), solvents, liquefied gas, Applications: Pipe flanges, valve bonnets, towers & tanks, pressure vessels and heat exchangers, Color type: Black, Print color: Black. The ring molded article supports JPI (ASME / ANSI)

815601
BLACKHYPER™ Valqua® No. GF300. This gasket is mainly composed of PTFE as a binder and doesn’t contain any rubber. Features: Very minor change in physical properties even under high temperatures, Excellent chemical resistance. Excellent heat resistance, Easy to handle , Does not harden easily, No hardening makes retightening possible. Temperature: -200 to 300oC/-328 to 572oF, Pressure: Max 3.5 MPa, Suitable fluids: General fluids (water, steam, oil, etc.), solvents, liquefied gas, Applications: Pipe flanges, valve bonnets, towers & tanks, pressure vessels and heat exchangers, Color type: Black, Print color: Black. The ring molded article supports JPI (ASME / ANSI)

815535
For General Use Valves – Valqua® No. VFT-22. Coil packing made of expanded graphite yarn clad with PTFE film, and braided into a square cross-section, that is, gland packing that makes use of the features of each material. Features: Excellent in sealing property and durability with expanded graphite as the major material. Low stem friction as the surface is clad with PTFE.

815492
For Low & Medium Shaft Speed Pumps and Rotary Equipment – Valqua® No. 8132. Coil packing made of blended yarn of aramid fibers and of artificial inorganic fibers treated with PTFE dispersion, braided into a square cross section, and then finished soft with PTFE dispersion and lubricating oil. Features: Flexible and compatible with shafts. Being white, can be used for fluid applications where black should be avoided. Can be used as shaft seals of pumps for handling water-based and oil-based fluids as well as weak acid and weak alkaline fluids. Also used as shaft seals for rotating machines where contamination is undesirable, such as mixers and agitators.

815410
For Water & Oil Pumps – Valqua® No. 6201. Coil packing made of carbonized fabric yarn, processed with PTFE dispersion and lubricating oil, then braided into a square cross-section and finished with PTFE, fine graphite and lubricating oil. Features: Serviceable for relatively versatile fluids. Allows permissible PV value and shaft speed limit. Reduced shaft wear due to packing.

815286
Elastic adhesives and sealants are used in many areas of industrial production and assembly. They combine the advantages of adhesive bonding and sealing technology and are used wherever the elasticity and the sealing of a joint are the most important requirements. Solvent-free special silicone sealant. Temperature resistant from -60°C (-76°F) up to +280°C (+536°F) (briefly up to +300°C (+572°F)). High oil and grease resistance.

815283
Elastic adhesives and sealants are used in many areas of industrial production and assembly. They combine the advantages of adhesive bonding and sealing technology and are used wherever the elasticity and the sealing of a joint are the most important requirements. Temperature resistant up to +230°C (+446°F), briefly up to 300°C (+572°F)

815282
Elastic adhesives and sealants are used in many areas of industrial production and assembly. They combine the advantages of adhesive bonding and sealing technology and are used wherever the elasticity and the sealing of a joint are the most important requirements. Temperature resistant up to +230°C (+446°F), briefly up to 300°C (+572°F)

815271
Elastic adhesives and sealants are used in many areas of industrial production and assembly. They combine the advantages of adhesive bonding and sealing technology and are used wherever the elasticity and the sealing of a joint are the most important requirements. For versatile use. Very good adhesion without primer on aluminium, stainless steel and many other surfaces. Immediately overpaintable(wet in wet). Excellent aging and UV stability. Sandable after curing.

815014
Made of E.P.D.M. (Ethylene Propylene Diene Monomer) rubber and used as watertight door packing. Seawater resistance, and maximum temperature -40oC to + 70oC. Colour is black and Standard length : 10mtr. Tolerations: 18 – 30mm ±1.0mm, 30 – 50mm ± 1.5mm. The list shows standard size, and please ask your local LIMANi availability for the sizes other than these standard sizes.

815012
Made of E.P.D.M. (Ethylene Propylene Diene Monomer) rubber and used as watertight door packing. Seawater resistance, and maximum temperature -40oC to + 70oC. Colour is black and Standard length : 10mtr. Tolerations: 18 – 30mm ±1.0mm, 30 – 50mm ± 1.5mm. The list shows standard size, and please ask your local LIMANi availability for the sizes other than these standard sizes.

815011
Made of E.P.D.M. (Ethylene Propylene Diene Monomer) rubber and used as watertight door packing. Seawater resistance, and maximum temperature -40oC to + 70oC. Colour is black and Standard length : 10mtr. Tolerations: 18 – 30mm ±1.0mm, 30 – 50mm ± 1.5mm. The list shows standard size, and please ask your local LIMANi availability for the sizes other than these standard sizes.

815009
Made of E.P.D.M. (Ethylene Propylene Diene Monomer) rubber and used as watertight door packing. Seawater resistance, and maximum temperature -40oC to + 70oC. Colour is black and Standard length : 10mtr. Tolerations: 18 – 30mm ±1.0mm, 30 – 50mm ± 1.5mm. The list shows standard size, and please ask your local LIMANi availability for the sizes other than these standard sizes.

815005
Made of E.P.D.M. (Ethylene Propylene Diene Monomer) rubber and used as watertight door packing. Seawater resistance, and maximum temperature -40oC to + 70oC. Colour is black and Standard length : 10mtr. Tolerations: 18 – 30mm ±1.0mm, 30 – 50mm ± 1.5mm. The list shows standard size, and please ask your local LIMANi availability for the sizes other than these standard sizes.

815004
Made of E.P.D.M. (Ethylene Propylene Diene Monomer) rubber and used as watertight door packing. Seawater resistance, and maximum temperature -40oC to + 70oC. Colour is black and Standard length : 10mtr. Tolerations: 18 – 30mm ±1.0mm, 30 – 50mm ± 1.5mm. The list shows standard size, and please ask your local LIMANi availability for the sizes other than these standard sizes.

815003
Made of E.P.D.M. (Ethylene Propylene Diene Monomer) rubber and used as watertight door packing. Seawater resistance, and maximum temperature -40oC to + 70oC. Colour is black and Standard length : 10mtr. Tolerations: 18 – 30mm ±1.0mm, 30 – 50mm ± 1.5mm. The list shows standard size, and please ask your local LIMANi availability for the sizes other than these standard sizes.

815001
Made of E.P.D.M. (Ethylene Propylene Diene Monomer) rubber and used as watertight door packing. Seawater resistance, and maximum temperature -40oC to + 70oC. Colour is black and Standard length : 10mtr. Tolerations: 18 – 30mm ±1.0mm, 30 – 50mm ± 1.5mm. The list shows standard size, and please ask your local LIMANi availability for the sizes other than these standard sizes.

814910
Compact designed for wedge sheave, and suitable for higher speed and horsepower than standard sheave permit. It is excellent for heat resistance and anti-static property.

814681
It prevents slipping of V-belt and flat-belts. Available as solid cake or liquid spray type.

813997
A glass wool blankets made of lamellas with an aluminium facing which acts as vapor barrier.
Temperature : 250°C.

813995
A glass wool blankets made of lamellas with an aluminium facing which acts as vapor barrier.
Temperature : 250°C.
