81. Packing & Jointing

Loctite? instant adhesives cure very quickly when confined between surfaces, triggered by the humidity on the surfaces. Cyanoacrylates are chosen for bonding small parts to achieve extremely fast fixturing. They are clean and easy to apply and join a wide variety of dissimilar materials. From among the various types of products, the most common products are listed below.

Excellent workability and fitting any piping or winding materials.High close-adhesiveness and self-adhesiveness. Good Workability: Leak none tape does not include any adhesive materials and it has good workability without sticking to the hands or any goods surrounding the working space. The tape, slightly tensed while taping, will adhere within in 20 to 30 minutes by overlapping about every half width of tape to the material. It is not necessary to fasten by any hose band over the wrapped tape.
Applicable of Underwater Taping: Able to stop the liquid leaking (about 2 to 3 kgf/cm2) and also able to tape even in water. In this case the tape must be winded, pressing over by hand, to the material to avoid the water and trash permeating between the layer of tapes.
Applicable to Various Materials/Uses: This tape is applicable not only for protecting the leakage but also preventing the damage by salt and for electric insulation/ This tape can be applied to various kinds of material, such as metal, gum, plastic resin including PVC, piping stick materials or line materials, etc.

Uses: For protection against corrosion and the water-proofing of pipes, flanges and valves for marine use. Compound: A neutral compound based on saturated petroleum hydro carbons (petrolatum) with inert fillers. Fabric: Fabric carrier free from chemical impurities, fully impregnated and coated on both sides. Characteristics: Unalterable in composition and plasticity over a wide range of temperatures. Slight superficial oxidation occurs in atmospheric application and renders the surface less tacky. Has a very high degree of impermeability to water. Won?t crack or harden. Unaffected by vibration and highly resistant to mineral acids, alkalis and salt. Basically no VOC?s (Volatile Organic Compounds) contains so it is friendly to the environment.

Designed and recommended for stopping leaks in pipe which may occur due to corrosion or other reasons. Composed of a quality knitted fiberglass cloth coated with a special poly-urethane resin which is activated by a 5 second immersion in water. Once activated by water the tape will transform from a wet adhesive into a rigid plastic state in minutes. Bonds to most common plastic or metallic pipe materials such as steel, iron, copper, PVC, fiberglass, and others. Recommended for leaks not exceeding 1/8″ in diameter and pipe size 2″ in diameter. May be used with good results on pipe with a temperature range from ?29oC to 121oC. Each roll of products is individually packaged with gloves for handling.

Designed and recommended for stopping leaks in pipe which may occur due to corrosion or other reasons. Composed of a quality knitted fiberglass cloth coated with a special poly-urethane resin which is activated by a 5 second immersion in water. Once activated by water the tape will transform from a wet adhesive into a rigid plastic state in minutes. Bonds to most common plastic or metallic pipe materials such as steel, iron, copper, PVC, fiberglass, and others. Recommended for leaks not exceeding 1/8″ in diameter and pipe size 2″ in diameter. May be used with good results on pipe with a temperature range from ?29oC to 121oC. Each roll of products is individually packaged with gloves for handling.

Loctite? instant adhesives cure very quickly when confined between surfaces, triggered by the humidity on the surfaces. Cyanoacrylates are chosen for bonding small parts to achieve extremely fast fixturing. They are clean and easy to apply and join a wide variety of dissimilar materials. From among the various types of products, the most common products are listed below.

Specially designed for marine use, containing 17 sizes/222 pieces. Packed in a transparent sturdy- hinged acrylic case. Details of the sizes are as follows.

A teflon made tasteless, odourless ribbon which effectively seals a joint. Ribbon dope will withstand temperature from ?100oC to +260oC. Unaffected by acids, solvents, steam, etc.

A teflon made tasteless, odourless ribbon which effectively seals a joint. Ribbon dope will withstand temperature from ?100oC to +260oC. Unaffected by acids, solvents, steam, etc.