81. Packing & Jointing

Pillar No. 6633 – Structure: An expanded graphite sheet gasket reinforced with stainless-steel foil to protect against tearing and improve ease of handling. Features: 1. Extremely thermally resistant. 2. Tear resistant. 3. Easily cut with a knife or scissors. 4. Highly chemically resistant. Applications: Suitable for use with pipe flanges and other types of applications that require gaskets with thermal resistance and anti-chemical properties. Performance: Temperature -200 to 400oC. Pressure up to 5.2 MPaG

Pillar No. 6633 – Structure: An expanded graphite sheet gasket reinforced with stainless-steel foil to protect against tearing and improve ease of handling. Features: 1. Extremely thermally resistant. 2. Tear resistant. 3. Easily cut with a knife or scissors. 4. Highly chemically resistant. Applications: Suitable for use with pipe flanges and other types of applications that require gaskets with thermal resistance and anti-chemical properties. Performance: Temperature -200 to 400oC. Pressure up to 5.2 MPaG

Pillar No. 6633 – Structure: An expanded graphite sheet gasket reinforced with stainless-steel foil to protect against tearing and improve ease of handling. Features: 1. Extremely thermally resistant. 2. Tear resistant. 3. Easily cut with a knife or scissors. 4. Highly chemically resistant. Applications: Suitable for use with pipe flanges and other types of applications that require gaskets with thermal resistance and anti-chemical properties. Performance: Temperature -200 to 400oC. Pressure up to 5.2 MPaG

Tankatite 440. Constructed from a resilient elastomeric core spirally wrapped with P.T.F.E. tape for added chemical protection. The core is then surrounded with successive braided jackets of inert polypropylene which is wrapped with further layers of P.T.F.E. tape and finally enclosed in braid of P.T.F.E. yarns. Tankatite 440 provides a reliable seal for tank lids, main hatches, and cleaning covers on tankers carrying all known bulk liquid cargoes in all IMO classes. It will protect the cargo from sea-water ingress and prevent any environmental contamination by the cargo itself. Tankatite 440 meets U.S. Coast Guard requirements for tank lid sealing of hazardous cargoes and is pressure tight beyond Lloyds and Det Norske Veritas (DNV) test criteria. Any reasonable length can be supplied in square or rectangular from 12.5mm upwards, or can be supplied in factory produced endless ring form to exactly fit the tank lid recess.

Pilot Lidpack 3800. Constructions: Specially developed to seal marine cargo tank lids. The PTFE outer cover gives complete protection to the packing and is abrasion resistant. The unique core construction enables the packing to be welded together to form an endless seal, thus preventing the chance of any leakage at the joint. Performance: Max. Temperature 100oC, Pressure 1 Bar. pH 1 to 14. Applications: For static cargo or chemical tanks, and acids, alkalis, oils, solvents, chemicals and edible products.
In coils or cut to size upon request. Also available in square or rectangular sections as required.

Pilot Lidpack 3800. Constructions: Specially developed to seal marine cargo tank lids. The PTFE outer cover gives complete protection to the packing and is abrasion resistant. The unique core construction enables the packing to be welded together to form an endless seal, thus preventing the chance of any leakage at the joint. Performance: Max. Temperature 100oC, Pressure 1 Bar. pH 1 to 14. Applications: For static cargo or chemical tanks, and acids, alkalis, oils, solvents, chemicals and edible products.
In coils or cut to size upon request. Also available in square or rectangular sections as required.

Beldam Pilotpack 67. Plaited from high grade flax blended with other natural fibres carefully selected to provide a high wet strength when in contact with sea water thereby ensuring a long packing life. Each strand is thoroughly impregnated with a special water resistant mica lubricant before plaiting. Performance:
Max. Temperature 120oC, Pressure 70 bar, pH 5-9, Speed 8 m/s Applications: Reciprocating, rotary and static, Stern glands and in smaller sizes general purpose water packing.

Pillar No. 6711 Structure: A graphite packing made of braided expanded graphite yarn reinforced with NCF600 wire with its surface being coated with graphite powder. Features: Can be used without top and bottom adaptor packing. Application: It is suitable for high-temperature and high pressure valves. Performance: Temperature -200 to 600oC (at oxygen atmosphere limited to 450oC), Pressure to 25.9 MPaG (264 kgf/cm2) (Class 1500)

Pillar No. 6711 Structure: A graphite packing made of braided expanded graphite yarn reinforced with NCF600 wire with its surface being coated with graphite powder. Features: Can be used without top and bottom adaptor packing. Application: It is suitable for high-temperature and high pressure valves. Performance: Temperature -200 to 600oC (at oxygen atmosphere limited to 450oC), Pressure to 25.9 MPaG (264 kgf/cm2) (Class 1500)

Pillar No. 6521L A packing made of carbonized fiber which is impregnated with the PTFE resin liquid and interlocking braided into square and then impregnated with a special lubricant after. Feature: A sister product of Style 6501L, has further been improved in its pressure-proof property and has characteristics that its sealing property is less influenced by pressure fluctuation of pump and it is stable when used for a large-sized shaft. Applications: Water, hot water, oil, solvent, weak acid, weak alkali, pumps, mixers, sterntubes. Performance: pH 2 to 12, Temp. 200℃,
Press. 1.2 MPa {12.5 kgf/cm2}, Velocity 20 m/s, V value 9.8 MPa•m/s {100 kgf/cm2•m/s}

Pillar No. 4536WL Structure: A white gland packing made of aramid-fiber-covered yarn. It is treated with special lubricant and PTFE to ensure good lubricity. Feature: It has outstanding flexibility and sealing properties. Applications: For rotating equipments that require white packings. Performance: Temperature to 260oC (Over 80oC, external cooling required), Pressure to 1.0MPaG (10kgf/cm2), Velocity to 10m/s, PV to 6.5MPaG·m/s(150kgf/cm2·m/s)

Pillar No. 4536WL Structure: A white gland packing made of aramid-fiber-covered yarn. It is treated with special lubricant and PTFE to ensure good lubricity. Feature: It has outstanding flexibility and sealing properties. Applications: For rotating equipments that require white packings. Performance: Temperature to 260oC (Over 80oC, external cooling required), Pressure to 1.0MPaG (10kgf/cm2), Velocity to 10m/s, PV to 6.5MPaG·m/s(150kgf/cm2·m/s)

Pillar No.426F Structure and Features: A gland packing made of braided hemp fibers impregnated with PTFE dispersion and white grease as lubricant. Applications: Ideal choice for sealing stern tube (low pressure sea water) and rubber stock. 426F can also be used for sealing rotating equipments and reciprocating equipments. Performance: Temperature to 80oC, Pressure to 0.6 MPaG (6.5 kgf/cm2)
Velocity to 10 m/s, PV to 3.4 MPaG · m/s (35 kgf/cm2 · m/s)

Viton sheeting, known as fluoroelastomer or FKM, is highly appreciated for the most demanding industrial applications as it has the highest resistance to hydrocarbons, acids, alkalis and even oxidants, and its mechanical properties remain intact at temperatures of up to 200oC. Tensile strength: 6 – 8 MPA, Elongation: 300%, High temperature: 200oC, Hardness 75+/15 Shore A. Applications: Industrial maintenance (oils / high temperature) / Sealing

Viton sheeting, known as fluoroelastomer or FKM, is highly appreciated for the most demanding industrial applications as it has the highest resistance to hydrocarbons, acids, alkalis and even oxidants, and its mechanical properties remain intact at temperatures of up to 200oC. Tensile strength: 6 – 8 MPA, Elongation: 300%, High temperature: 200oC, Hardness 75+/15 Shore A. Applications: Industrial maintenance (oils / high temperature) / Sealing

A closed cell elastomeric nitrile rubber foam designed to provide a highly efficient method of insulating pipework, ducting and vessels. It is CFC (Chlorofluorocarbon) free and ideal for both hot and cold water services. Heat resistance temperature : -40℃ to 105℃. Standard coil length : 2 mtr.

Repairing and refurbishing metal structures being deteriorated through corrosion, bimetallic corrosion or in other ways. Especially used for corroded tanks, pump housings, valves, filter housing and strainers, tubes, heat exchanger end covers, flange faces. Roller bearing seats, alignment of bushings, shafts, hydraulic rams, key ways, etc. ?Cream? and ?Rapid? are both paste consistency and easy applied even to vertical surfaces, and ?Cream? is for slow curing and ?Rapid? is quick curing.

The epoxy compound for repair and rebuilding of deteriorated metal parts, exposed to excessive wear. Typical applications are corroded tanks, pump housings, impellers, valves, pipes, flange faces, roller bearing seats, worn shafts, hydraulic rams and heat exchangers. Wencon Cream is also excellent as a filling compound. Wencon Ceramic Cream can be machined, drilled and worked like metal after curing. The compound has a paste consistency and is easily applied by spatula also to vertical surfaces.